Building with cafeteria in first floor in N gauge Model Cetak 3D

Small apartment building which includes a small cafeteria on the first floor. In this case, a building with two different colors has been developed since the first floor is printed in another color. Outside tables and chairs are included in the cafeteria.

The scale is 1:150 which makes it suitable for electric model trains in N scale. It is made up of several STL files.

Dimensions:

Base measurements: 6.2 x 6.2 cm.
building measurements: 5.4 x 5.5 x 7.8 cm.

The structure of the first floor must be printed with supports and preferably in PLA material. For all other floors, support is recommended but may not be necessary.

Recommended colors: Floor 1 structure in gray, floor 2 in light blue, ceilings in gray, tables, chairs and doors in brown, windows in white.

Optimized for printers of any type.

The categories of each piece are in different STL files.

Although the holes are designed for the correct insertion of windows and doors, the highest quality should still be used to print the latter, and the holes may need to be sanded or polished if necessary.

Glue should be used to attach windows, doors and roof, preferably UHU.

It does not include glass transparency, it is suggested to use mica or acetate.

3D PRINTING PARAMETERS
Extrusion temperature: 195-200º
Material: Any, but preferably PLA
Bed temperature: 55-60º
Does it require support?: No, only on the first floor