English
Español
Deutsch
日本語
Polska
Français
中國
한국의
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीHomemade air conditioner suitable for 3D printing 3D Принт Модель
okanunal
Monsters and Creatures
- Доступні формати: stl: stl 32.67 MB
- Колекція:
- Ширина в міліметрах:122
- Висота в міліметрах:168
- Глибина в міліметрах:173
- Готовність до друку:
- 3D Скан:No
- Зміст для дорослих:No
- PBR:No
- ШІ Навчання:No
- Перегляди:810
- Дата: 2024-07-24
- ID Товару:518467
- Рейтинг:
3D Printable Air Conditioner Model - Stay Cool During Hot Summer Days
This 3D model is an effective air conditioner system designed to cool your room during hot summer days. You can use it with 1 or 2 120mm fans according to your preference. The printable model consists of two parts:
-Air Conditioner Main Body
-Cold Water and Ice Container
Features and Usage Instructions:
-For efficient operation, the cold water or ice should be placed in the container, and the fans should be mounted in the same direction. This setup pulls air from outside, cools it inside, and provides you with a refreshing airflow. -If desired, the inside of the air conditioner main body can be fully lined with aluminum foil. This enhances the efficiency of the air conditioner and delays the melting of the ice inside.
3D Printer Compatible:
This model is specifically designed for 3D printing. Additionally, low poly versions of the model are available for use in games or cinematic scenes. File formats: STL, OBJ, FBX, MAYA
Polygons
-For Game: 53.139
-For 3d Printing: 329.807
Dimensions:
-Air Conditioner Main Body: 122x168x173 mm
-Cold Water and Ice Container: 97 x 167 x 32 mm
ДетальнішеThis 3D model is an effective air conditioner system designed to cool your room during hot summer days. You can use it with 1 or 2 120mm fans according to your preference. The printable model consists of two parts:
-Air Conditioner Main Body
-Cold Water and Ice Container
Features and Usage Instructions:
-For efficient operation, the cold water or ice should be placed in the container, and the fans should be mounted in the same direction. This setup pulls air from outside, cools it inside, and provides you with a refreshing airflow. -If desired, the inside of the air conditioner main body can be fully lined with aluminum foil. This enhances the efficiency of the air conditioner and delays the melting of the ice inside.
3D Printer Compatible:
This model is specifically designed for 3D printing. Additionally, low poly versions of the model are available for use in games or cinematic scenes. File formats: STL, OBJ, FBX, MAYA
Polygons
-For Game: 53.139
-For 3d Printing: 329.807
Dimensions:
-Air Conditioner Main Body: 122x168x173 mm
-Cold Water and Ice Container: 97 x 167 x 32 mm
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D-моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D-моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!
Завантажити Homemade air conditioner suitable for 3D printing 3D Принт Модель stl від okanunal
homemade airconditioner ventilation 3dprint printing lowpoly game house accessories summercooler ice container 120mm fan modelСхожі товари від Homemade air conditioner suitable for 3D printing
obj stl obj stl
Dzusto
Accessories
stl obj
Dzusto
Accessories
Home Builder To start, design a compact unit with a fan, cooling element, and housing that can be printed using a 3D printer. The fan can be powered by a small motor, and the cooling element can be as simple as a heat exchanger or a container for ice or cold water. The 3D-printed housing should be designed to hold these components securely while allowing for optimal airflow. Ensure that the design includes vents for air intake and exhaust to maximize cooling efficiency. Once printed, assemble the components, connect the fan to a power source, and add ice or cold water to start the cooling process. This DIY approach not only offers a fun project for 3D printing enthusiasts but also provides an accessible way to create a personalized air conditioning solution.