DIY Wall clock with rope numbers Model 3D

- Dostępne formaty: blend: blend 87.34 MB
Render: Cyclesfbx: fbx 4.58 MBobj: obj 6.22 MB
- Wielokąty:137431
- Wierzchołki:170757
- Model animowany:No
- Tekstury:No
- Oparty na szkielecie:No
- Materiał:
- Low-poly:No
- Kolekcja:No
- UVW mapping:No
- Plugins Used:No
- Gotowy do wydruku:No
- 3D Scan:No
- Adult content:No
- PBR:No
- AI Szkolenie:No
- Geometria:Polygonal
- Unwrapped UVs:Unknown
- Liczba wyświetleń:386
- Data: 2025-06-01
- ID produktu:576871
- Oceny:
- Make your own custom wall clock made with decorative rope and wooden board
- Wall clock with cheap items you can buy on Chinese online shop sites
- The hand length and the diameter of the board are shown in the picture
- DXF file with a layout for drilling holes for the ropes is included
- The numbers are formed from 6 mm thick ropes and the lines above the numbers are made from 4 mm thick ropes for model-1
- The numbers are formed from 6 mm thick ropes and the frame above the numbers are made from 10 mm thick ropes for model-2
- The materials are prepared for Cycles render
- Clock board contains N-gons
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!