English
Español
Deutsch
日本語
Polska
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीprintable rc jet-boat with printable propulsion Modèles 3D en vedette
- Collection
- Formats disponibles: max: max 591.50 kb
- Collection:
- Largeur en millimètres:150
- Profondeur en millimètres:450
- Prêt à imprimer:
- 3D Balayage:No
- Contenu adulte:No
- PBR:No
- Vus:3253
- Date: 2020-02-15
- ID de produit:276251
- Rating:
print your boat completely with printable jet propulsion, impeller, stator, nozzle, it runs with a 550 brushed motor, and a 320a rc controller 3s, preferably print in pla, and give a surface layer of epoxy resin to seal the surface by waterproofing it.
the cover is divided into 5 parts that must be glued, i recommend doing it with epoxy resin, the components are comercial rc products, initially the model was designed to carry an ardupilot, to be autonomous.
instructions
print pla
print01 108g 7h30m print 8% infill
print02 87g 5h42m print 8% infill
print03 93g 6h10m print 8% infill
print04 54g 4h00m print 8% infill
print05 40g 2h55m print 8% infill
tobdir 12g 1h05m print 100% infill
tobprin 12g 1h12m print 100% infill need support 3% zigzag
tapa1bot113g 9h27m print 15% infill need support 3% zigzag
tapa2bot65g 5h26m print 15% infill need support 3% zigzag
43h30m
584g filament
En savoir plusthe cover is divided into 5 parts that must be glued, i recommend doing it with epoxy resin, the components are comercial rc products, initially the model was designed to carry an ardupilot, to be autonomous.
instructions
print pla
print01 108g 7h30m print 8% infill
print02 87g 5h42m print 8% infill
print03 93g 6h10m print 8% infill
print04 54g 4h00m print 8% infill
print05 40g 2h55m print 8% infill
tobdir 12g 1h05m print 100% infill
tobprin 12g 1h12m print 100% infill need support 3% zigzag
tapa1bot113g 9h27m print 15% infill need support 3% zigzag
tapa2bot65g 5h26m print 15% infill need support 3% zigzag
43h30m
584g filament
Avez besoin de plus de formats?
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Télécharger printable rc jet-boat with printable propulsion Modèles 3D en vedette max De etasinetas
boat ship jet water rc fast electronic cheapest controller radio light printable pla anet printerAucun commentaires sur ce produit.
Produits liés De printable rc jet-boat with printable propulsion
stl
aarnau72
Electronics
