Español
Deutsch
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदी
stl max max x_t step
adriancubas
Engineering
- Available formats: max: max 504.10 kbx_t: x_t 272.92 kbstep: step 348.72 kbstl: stl 2.15 MB
- Collection:No
- Print Ready:
- 3D Scan:No
- Adult content:No
- PBR:No
- Views:3735
- Date: 2020-11-18
- Item ID:322054
- Rating:
solidworks software (2017) was used for modeling.
in this project, the modeling of the parts for the construction of a small wind turbine was carried out. the propellers come from pvc pipes of 110mm in diameter and 4mm in thickness.
these propellers are attached to a 3a 1.8 degrees per step nema 23 stepper motor.
the propellers can be folded forward for easy portability. the two pairs of wires coming from the stepper motor carry alternating current and must be rectified and filtered to convert it to dc. this project is based on the results obtained in my instructables project:
https://www.instructables.com/portable-savonius-wind-turbine-with-deflectors/
in this instructable a stepper motor was also used as an electrical generator.
files can be 3d printed. abs or petg filaments are recommended.
Read morein this project, the modeling of the parts for the construction of a small wind turbine was carried out. the propellers come from pvc pipes of 110mm in diameter and 4mm in thickness.
these propellers are attached to a 3a 1.8 degrees per step nema 23 stepper motor.
the propellers can be folded forward for easy portability. the two pairs of wires coming from the stepper motor carry alternating current and must be rectified and filtered to convert it to dc. this project is based on the results obtained in my instructables project:
https://www.instructables.com/portable-savonius-wind-turbine-with-deflectors/
in this instructable a stepper motor was also used as an electrical generator.
files can be 3d printed. abs or petg filaments are recommended.
Need more formats?
If you need a different format, please send us a Conversion Request. We can convert 3D models to: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. We do not convert 3d scenes and solid formats such as .step, .iges, .stp, .sldprt etc!
If you need a different format, please send us a Conversion Request. We can convert 3D models to: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. We do not convert 3d scenes and solid formats such as .step, .iges, .stp, .sldprt etc!
Download stepper motor wind turbine 3D Print Model max x_t step stl From adriancubas
wind turbine stepper motorThere are no comments for this item.
