Vought Corsair F4U4 3D-Modell

- Verfügbare Formate: max2017: max2017 34.64 MB
Render: VRay 3.0fbx: fbx 34.24 MBobj: obj 30.89 MB
- Polygone:141408
- Eckpunkte:258946
- Animiert:No
- Texturen:
- Rigged:No
- Materialien:
- Low-poly:No
- Sammlung:No
- UVW mapping:No
- Plugins Used:No
- Druckfertige:No
- 3D-Scan:No
- Erwachsene:No
- PBR:No
- KI-Training:No
- Geometrie:Polygonal
- Unwrapped UVs:Non-overlapping
- Betrachter:878
- Datum: 2024-11-23
- Artikel-ID:542409
- Bewertung:
The last variant to see action during World War II. Deliveries to the U.S. Navy of the F4U-4 began in early 1945. It had the 2,100 hp (1,600 kW) dual-stage-supercharged -18W engine. When the cylinders were injected with the water/alcohol mixture, power was boosted to 2,450 hp (1,830 kW). The aircraft required an air scoop under the nose and the unarmored wing fuel tanks of 62 US gal (230 L) capacities were removed for better maneuverability at the expense of maximum range. The propeller was changed to a four blade type. Maximum speed was increased to 448 miles per hour (721 km/h) and climb rate to over 4,500 feet per minute (1,400 m/min) as opposed to the 2,900 feet per minute (880 m/min) of the F4U-1A.
Druckfertige: NeinFalls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D-Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D-Szenen und Formate wie .step, .iges, .stp, .sldprt usw!