English
Español
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीcase for the electronic board dk-c-04 3D-Druckmodell
step
Kamenskiy3D
Jewellery
step
Kamenskiy3D
Parts of auto
step
Kamenskiy3D
Parts
- Verfügbare Formate: obj: obj 12.19 MB
- Sammlung:No
- Breite in Zentimeter:6,8
- Breite in Millimeter:68
- Höhe in Millimeter:19
- Tiefe in Millimeter:42
- Druckfertige:
- 3D-Scan:No
- Erwachsene:No
- PBR:No
- Betrachter:3058
- Datum: 2021-10-24
- Artikel-ID:371991
- Bewertung:
the case model of the dk-c-04 electronic board of the dc432 time delay controller.
the model is ready for production by 3d printing. the design has been successfully tested.
the overall dimensions of the model are indicated in the drawing.
the assembly of the case consists of several parts:
1. the lower part of the case;
2. upper part of the case;
3. button (4 pieces).
attention! the electronic board shown in some pictures is shown for example and is not included in the assembly.
there are indented inscriptions on the sides of the case, duplicating the designations of the contacts on the electronic board.
fixation is provided without the use of screws. just print out and close the case.
fixation is ensured by the engagement of the contacting faces due to the side texture of the layers during 3d printing.
warning: the first closure will require little effort.
Mehr lesenthe model is ready for production by 3d printing. the design has been successfully tested.
the overall dimensions of the model are indicated in the drawing.
the assembly of the case consists of several parts:
1. the lower part of the case;
2. upper part of the case;
3. button (4 pieces).
attention! the electronic board shown in some pictures is shown for example and is not included in the assembly.
there are indented inscriptions on the sides of the case, duplicating the designations of the contacts on the electronic board.
fixation is provided without the use of screws. just print out and close the case.
fixation is ensured by the engagement of the contacting faces due to the side texture of the layers during 3d printing.
warning: the first closure will require little effort.
Sie brauchen mehr Formate?
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D-Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D-Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D-Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D-Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Download case for the electronic board dk-c-04 3D-Druckmodell obj Von Kamenskiy3D
electronics controller delay relay board engineering assembly diy gadget rc device designing cyclic timer technology electricity display case boxEs gibt keine Kommentare zu diesem Artikel.
Verwandte Artikel Von case for the electronic board dk-c-04
stl
mykola.lop
Electronics
stl
ivelin.ivanov
Electronics