Innovative 3D Design Model for Modern Spaces 3D 프린트 모델

$5.99
Innovative 3D Design Model for Modern Spaces 3D 프린트 모델
$ 5.99
제거 이 아이템 북마크
  • 컬렉션:
    No
  • 너비 (센티미터):
    10
  • 인치 단위:
    3.94 inch
  • 밀리미터 폭:
    100 mm
  • 밀리미터 넓이:
    100 mm
  • 밀리미터 깊이:
    100
  • 프린트 준비:
  • 3D 스캔:
    No
  • 성인용 콘텐츠:
    No
  • PBR:
  • AI 훈련:
    No
  • 조회:
    130
  • 날짜:
  • 아이템 ID:
    578467
  • 평점:

This 3D model embodies innovation and modernity, specifically designed to meet the needs of contemporary spaces. It features intricate details and smooth shapes, making it ideal for a variety of projects, from interior design to architectural models.

3D printing settings

Printer Type:

FDM (Fused Deposition Modeling) or SLA (Stereolithography) based on the desired finish.
Layer Height:

Recommended: 0.1 - 0.2 mm for detailed prints.
For faster prints, a layer height of 0.3 mm can be used, but detail may be lost.
Infill Density:

Recommended: 20-30% for a good balance of strength and material usage.
For more structural integrity, increase to 50%.
Print Speed:

Recommended: 50-60 mm/s for optimal quality.
Can be adjusted based on printer capability.
Temperature Settings:

PLA: Nozzle temperature: 190-210°C; Bed temperature: 50-60°C.
ABS: Nozzle temperature: 220-250°C; Bed temperature: 90-110°C.
Resin (for SLA): Follow the manufacturer’s recommendations.
Support Structures:

Use supports for overhangs greater than 45 degrees.
Consider using breakaway or soluble supports for easier removal.
Cooling:

Enable part cooling fan for PLA prints.
For ABS, minimize cooling to prevent warping.
Manufacturing Instructions:
Preparation:

Ensure the 3D printer is calibrated and clean.
Load the appropriate filament or resin based on the desired material.
Slicing:

Use slicing software (e.g., Cura, PrusaSlicer) to prepare the model.
Import the STL file and adjust settings as per the recommendations above.
Generate the G-code for FDM printers or prepare the print file for SLA printers.
Printing:

Start the print job and monitor the first few layers to ensure proper adhesion.
Keep an eye on the print progress for any issues such as warping or misalignment.
Post-Processing:

For FDM prints, remove supports carefully and sand any rough edges if necessary.
For SLA prints, wash the model in isopropyl alcohol (IPA) and cure it under UV light.
Optionally, paint or finish the model as desired.
Final Inspection:

Check the model for any defects or imperfections.
Ensure all parts are securely attached and functional.
This guide provides a comprehensive overview of the settings and manufacturing instructions for successfully producing the Innovative 3D Design Model for Modern Spaces. If you have any specific requirements or adjustments, feel free to ask!

다른 포맷이 필요하세요?
다른 포맷이 필요하시면, 새로운 지원 티켓을 열어 요청하세요. 저희는 3D 모델을 다음으로 변환할 수 있습니다: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 우리는 3D 장면을 변환하지 않습니다 .step, .iges, .stp, .sldprt와 같은 형식도 포함됩니다.!

다운로드 Innovative 3D Design Model for Modern Spaces 3D 프린트 모델 blend 발신 graphicore3d

3d design modern architecture interior modeling custom models architectural visualization decor furniture realistic
이 아이템에 대한 코멘트 없음.