IFA W50 BTP crew cab version stl model car kits 3d printer files Modelo de impresión 3D

For RC and Diecast enthusiast.
Large scales can use FDM or Resin printing. Small scale - resin.
The model is combined, all the main parts are presented as separate parts, so they are easily modified or removed.
The *.stl files are in the *.zip archive.

Specs: •1:8 •1:10 •1:12 •1:14 •1:16 •1:18 •1:20 •1:24 •1:25 •1:28 •1:35 •1:43 •1:48 •1:64
The model includes: • Body • Interior • Chassis parts • Wheels • Tires • Windows and gl*****

The W50 was equipped with a crew cab for use by work teams. The vehicle design consists of a ten-seater cabin and a platform. The Bautrupp-Wagen (BTP) also met the requirements in the field and could also be used there with an all-wheel drive chassis and low-pressure tires. It was used in post and telecommunications, in the energy industry and as a rescue vehicle.
The TB Berlin vehicles in their typical blue were an integral part of the cityscape.


**Attention:
-For experienced model builder
-Parts could need some adjustments with files or sand paper
-Take care when you remove the supports
-Parts should be glued.
-Not recommended for kids
-Be careful with the alignment of pieces when gluing.
-Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels
-Check dimmensions of your model before printing