3d stl model files Tire Rims Wheel set for scale model car
3D-Druckmodell

The model is combined, all the main parts are presented as separate parts, so they are easily modified or removed.
The *.stl files are in the *.zip archive.
You can print with SLA printer.

Specs:
•1:16 •1:24 •1:25 •1:64

Dimensions for scale 24 - width tires: •10mm •11mm •13mm
Diameter for scale 24 - rims: 20.30mm

*Please note the axle width and attachment method on your car model. The 3D model may differ from the original in the dimensions and appearance of some parts, since information about the dimensions and appearance is taken from open sources. And often the information is different in different sources. The author reserves the right to take what dimensions as the basis for creating a 3D model.

**Attention: -For experienced model builder -Parts could need some adjustments with files or sand paper -Take care when you remove the supports -Parts should be glued. -Not recommended for kids -Be careful with the alignment of pieces when gluing. -Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels -Check dimmensions of your model before printing

Please do not Redistribute or sell this STL file online